colorFabb varioShore TPU Natural Filament | 1.75MM, 0.70KG Spool

At temperatures between 200 and 250°C the materials will start to expand to roughly 1.4-1.6 times its original volume. This means the material can be printed at low flow rates (60-70%), to compensate the active foaming, which in return gives very soft printed parts.

Between 190-200°C the material can be printed without foaming, resulting in different haptics and harder prints compared to foamed samples.

Developed in co-operation with Lubrizol, varioShore TPU is a material ideally suited for printing insoles and cosplay parts for instance.

Please note that colour variations may occur with colorFabb varioShore TPU. Colour will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer colour.

Tip! Use the least amount of cooling when maximum foaming is required. For better overhang performance use 50-100% cooling.

We advise our community to use standard TPU settings as a base setting for developing your own pre-sets.

Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues.